Spaceflight Now





NASA orders full round of stiffeners to Discovery tank
BY WILLIAM HARWOOD
STORY WRITTEN FOR CBS NEWS "SPACE PLACE" & USED WITH PERMISSION
Posted: January 10, 2011


Bookmark and Share

Senior NASA managers Monday agreed to install stiffeners all the way around the shuttle Discovery's external tank to beef up structural ribs, or stringers, that are susceptible to cracks when exposed to ultra-low-temperature propellant. Engineers say the modifications can be completed in time to support at launch as early as Feb. 24, assuming the work goes smoothly and no other major problems develop.


Credit: NASA
 
The so-called radius block plates will be attached to the top few inches of all the stringers making up the ribbed intertank that separates the external tank's liquid oxygen and hydrogen sections. Eight known cracks in five of the 108 stringers already have been repaired by splicing in fresh stringer segments and installing doublers for additional strength.

The cracks occurred near the top of the intertank where the stringers meet a large flange that supports the bottom of the liquid oxygen tank. Ultra-low-temperature liquid oxygen causes the tank to contract during fueling, which tends to pull the upper sections of the stringers inward.

The tank was designed to cope with that contraction, but it appears a specific lot of aluminum alloy used in this tank's construction provided less strength than expected. The tanks scheduled for use with the shuttle Endeavour in April and the shuttle Atlantis in June or July were built with alloys that are believed to have the proper strength.

To strengthen the rest of the stringers in Discovery's tank, radius block plates will be riveted into place over the anchors that hold the existing stringers in place. Testing indicates the modification will ensure the tank is up to the rigors of fueling and launch, giving it the safety margin needed to clear Discovery for flight.

But additional analysis will be needed to make sure the modifications do not introduce any unintended consequences. Sources said shuttle Program Manager John Shannon decided to press ahead with the repairs in parallel with work to flight certify the modifications. While that approach could lead to additional delays if the certification runs into problems, a senior manager said the tank could not be flown "as is" and that it made sense to proceed with repairs in parallel based on the results of testing to date.

In any case, engineers are proceeding cautiously in the wake of an incident in which a technician, working to drill out a stringer fastener so a cracked segment could be removed, inadvertently drilled into the underlying skin of the liquid oxygen tank. The damage was minimal and technicians were expected to simply buff out the blemish. But as a result, NASA managers have decided to leave each stringer's top-most fastener in place and to install radius blocks over fasteners two through seven instead.

"It's tricky working in the area when they're that close to the tank," an official said. "So they decided not to worry about fastener No. 1 on any of these stringers."

Shuttle engineers briefed senior management Monday on the status of the repairs and Bill Gerstenmaier, director of space operations at NASA headquarters, planned to brief John Holdren, director of the Obama administration's Office of Science and Technology Policy, later in the day. Gerstenmaier, shuttle Program Manager John Shannon and space station Program Manager Mike Suffredini were scheduled to hold a news conference Tuesday to discuss the status of the tank repair work and analysis.

Discovery originally was scheduled for launch Nov. 1 on a space station resupply mission. But the flight was repeatedly delayed by relatively minor technical problems and finally, on Nov. 5, by a gaseous hydrogen leak in a 7-inch vent line quick-disconnect fitting on the side of the external tank.

During work to drain the tank, engineers spotted cracks in its foam insulation near the top of the intertank compartment that separates the tank's hydrogen and oxygen sections. When the damaged foam was removed, four cracks were found in two adjacent stringers near the tank's left-side booster attachment thrust panel, which helps carry the load during launch.

After a fueling test Dec. 17 to collect additional data, Discovery was moved back to the Vehicle Assembly Building for additional inspections. Four more small cracks were found in three stringers on the back side of the tank, which could not be inspected at the launch pad.

Analysts have been unable to identify a single root cause explaining why the cracks formed in the first place, a key element in developing the engineering justification for proceeding with flight. But the radius block modification should provide the confidence needed to press ahead if no unintended consequences are identified.

Two launch windows were available in February, one opening on Feb. 3 and closing one week later and another opening Feb. 27 and closing March 6. NASA managers decided last week to pass up the first window to give engineers more time to assess the crack issue and to make a decision on whether to install the radius block stiffeners all the way around the tank.

The Feb. 27 opening of the second launch window was based on the planned Feb. 15 launch of a European Space Agency cargo spacecraft that was scheduled to dock at the space station on Feb. 26. But it appears the rendezvous timeline can be compressed, allowing NASA to launch Discovery as early as Feb. 24 if ESA's Automated Transfer Vehicle takes off on time and has no problems in orbit.

NASA and contractor managers and engineers are expected to set a new target launch date during a program requirements control board meeting Thursday. It's not yet clear how Discovery's launch delays will affect the following launch, a mission by the shuttle Endeavour to deliver a $2 billion physics experiment to the International Space Station.

It appears Endeavour will be delayed to mid April, but no decisions have been announced.

The official embroidered crew patch for shuttle Discovery's final flight is available in our store. Free shipping to U.S. addresses!
U.S. SHOPPERS | WORLDWIDE


Spaceflight Now Plus
Additional coverage for subscribers:
VIDEO: WORK UNDERWAY TO REMOVE FOAM AND SENSORS PLAY | HI-DEF
VIDEO: SETTING UP ACCESS PLATFORMS AROUND TANK PLAY | HI-DEF

VIDEO: SHUTTLE ROLLED BACK TO ASSEMBLY BUILDING PLAY | HI-DEF
VIDEO: DISCOVERY DEPARTS LAUNCH PAD 39A PLAY | HI-DEF
VIDEO: LUNAR ECLIPSE OVER DISCOVERY PLAY | HI-DEF

VIDEO: HIGHLIGHTS FROM THE FUELING TEST PLAY | HI-DEF
VIDEO: RECAP OF THE FUELING EXERCISE PLAY
VIDEO: FUELING TEST COUNTDOWN UPDATE PLAY
VIDEO: COMMENTS FROM SHUTTLE LAUNCH DIRECTOR PLAY
VIDEO: GROUND UMBILICAL CARRIER PLATE CHECKED PLAY
VIDEO: INFO ON EXTERNAL TANK INSTRUMENTATION PLAY
VIDEO: DETAILED INFORMATION ON SPECIAL FUELING TEST PLAY

VIDEO: SHUTTLE DISCOVERY'S LAUNCH DELAYED TO FEBRUARY PLAY

VIDEO: FINAL PREPS FOR INSTRUMENTED TEST PLAY | HI-DEF
VIDEO: STRAIN GAUGES ATTACHED TO TANK PLAY | HI-DEF
VIDEO: BACKSCATTER INSPECTIONS OF TANK MIDSECTION PLAY | HI-DEF

VIDEO: INSTALLING DOUBLERS OVER STRINGERS PLAY | HI-DEF
VIDEO: GASEOUS HYDROGEN VENT ARM RETURNED PLAY | HI-DEF
VIDEO: DOUBLERS TO BEEF UP CRACKED BEAMS PLAY | HI-DEF
VIDEO: HYDROGEN FITTING IS REINSTALLED PLAY | HI-DEF
VIDEO: OPENING UP TANK'S ENTRANCE DOOR PLAY | HI-DEF
VIDEO: GUCP DETACHED AND SEALS REMOVED PLAY | HI-DEF
VIDEO: BROKEN FOAM REMOVED FROM THE TANK PLAY | HI-DEF
VIDEO: VENT ARM LETS GO FROM LEAKY GUCP PLAY | HI-DEF
VIDEO: DISCOVERY AWAITS REPAIRS TO TANK PROBLEMS PLAY | HI-DEF

VIDEO: INFORMATIVE DESCRIPTION OF TANK CRACK PROBLEM PLAY
VIDEO: DISCOVERY'S LAUNCH DELAYED TO MID-DECEMBER PLAY

VIDEO: GASEOUS HYDROGEN VENT ARM DETACHED FROM SHUTTLE PLAY

VIDEO: STS-133 MISSION PREVIEW MOVIE PLAY | HI-DEF
VIDEO: SHUTTLE DISCOVERY CREW BIOGRAPHIES PLAY | HI-DEF
VIDEO: ISS EXPEDITION 25-26 PREVIEW MOVIE PLAY | HI-DEF
VIDEO: SPACE STATION CREW BIOGRAPHIES PLAY | HI-DEF

VIDEO: POST-SCRUB NEWS BRIEFING ON LEAK PLAY
VIDEO: GASEOUS HYDROGEN LEAK SCRUBS LAUNCH PLAY | HI-DEF
VIDEO: BAD WEATHER DELAYS DISCOVERY LAUNCH PLAY
VIDEO: ELECTRICAL ISSUE NO LONGER A CONCERN FOR DISCOVERY PLAY
VIDEO: LAUNCH POSTPONED BY ELECTRICAL CONCERN PLAY
VIDEO: TUESDAY MORNING'S COUNTDOWN STATUS CHECK PLAY
VIDEO: DISCOVERY'S PRE-LAUNCH NEWS CONFERENCE PLAY
VIDEO: COUNTDOWN PREVIEW BRIEFING AND WEATHER FORECAST PLAY
VIDEO: ANOTHER 24-HOUR DELAY ORDERED TO FINISH REPAIRS PLAY
VIDEO: LAUNCH DELAYED 24 HOURS BY LEAK REPAIRS PLAY

VIDEO: ASTRONAUTS ARRIVE FOR LAUNCH PLAY | HI-DEF

VIDEO: FLIGHT READINESS REVIEW SETS LAUNCH DATE PLAY

VIDEO: SHUTTLE AND STATION PROGRAM BRIEFING PLAY
VIDEO: THE STS-133 MISSION OVERVIEW PRESENTATIONS PLAY
VIDEO: PREVIEW BRIEFING ON MISSION'S SPACEWALKS PLAY
VIDEO: IN-DEPTH BACKGROUND ON ROBONAUT 2 HUMANOID PLAY
VIDEO: THE ASTRONAUTS' PRE-FLIGHT NEWS BRIEFING PLAY

VIDEO: PAYLOAD BAY DOORS CLOSED FOR LAUNCH PLAY | HI-DEF
VIDEO: CREW LEAVES KSC FOR TRIP TO HOUSTON PLAY | HI-DEF
VIDEO: ASTRONAUTS INSPECT THE PAYLOAD BAY PLAY | HI-DEF
VIDEO: SHUTTLE EVACUATION PRACTICE PLAY | HI-DEF
VIDEO: ASTRONAUTS EGRESS SHUTTLE AS SEEN LIVE PLAY
VIDEO: ASTRONAUTS BOARD DISCOVERY PLAY | HI-DEF
VIDEO: SUN RISES ON LAUNCH PAD 39A PLAY | HI-DEF
VIDEO: LAUNCH DAY REHEARSAL BEGINS PLAY | HI-DEF
VIDEO: COMMEMORATIVE WALL SIGNING IN VAB PLAY | HI-DEF
VIDEO: CREW BRIEFED ON EMERGENCY PROCEDURES PLAY | HI-DEF
VIDEO: IN SHUTTLE TRAINING AIRCRAFT'S COCKPIT PLAY | HI-DEF
VIDEO: TEST-DRIVING AN EMERGENCY ARMORED TANK PLAY | HI-DEF

VIDEO: PRE-LAUNCH INTERVIEW WITH STEVE LINDSEY PLAY
VIDEO: PRE-LAUNCH INTERVIEW WITH ERIC BOE PLAY
VIDEO: PRE-LAUNCH INTERVIEW WITH AL DREW PLAY
VIDEO: PRE-LAUNCH INTERVIEW WITH TIM KOPRA PLAY
VIDEO: PRE-LAUNCH INTERVIEW WITH MIKE BARRATT PLAY
VIDEO: PRE-LAUNCH INTERVIEW WITH NICOLE STOTT PLAY

VIDEO: PAYLOADS INSTALLED INTO DISCOVERY PLAY | HI-DEF
VIDEO: MISSION PAYLOADS ARRIVE AT LAUNCH PAD PLAY | HI-DEF
VIDEO: CANISTER HAULING PAYLOADS TURNED UPRIGHT PLAY | HI-DEF
VIDEO: MODULE HOISTED INTO SHIPPING CANISTER PLAY | HI-DEF
VIDEO: WEIGHING NEW SPACE STATION MODULE PLAY | HI-DEF

VIDEO: GANTRY PLACED AROUND DISCOVERY PLAY | HI-DEF
VIDEO: SHUTTLE ATLANTIS REACHES PAD 39A PLAY | HI-DEF
VIDEO: CROWDS WATCH DISCOVERY'S FINAL ROLLOUT PLAY | HI-DEF

VIDEO: SHUTTLE HOISTED FOR ATTACHMENT TO TANK PLAY | HI-DEF
VIDEO: CRANE ROTATES THE ORBITER VERTICALLY PLAY | HI-DEF
VIDEO: DISCOVERY DEPARTS ITS HANGAR PLAY | HI-DEF

VIDEO: TIME-LAPSE SHOWS DISCOVERY ASCENDING IN VAB PLAY
VIDEO: TIME-LAPSE SHOWS THE MOVE TO ASSEMBLY BUILDING PLAY

VIDEO: DISCOVERY'S MAIDEN FLIGHT: FIRST TRIP TO VAB PLAY
VIDEO: DISCOVERY'S MAIDEN FLIGHT: ROLLOUT TO PAD 39A PLAY
VIDEO: DISCOVERY'S MAIDEN FLIGHT: TEST-FIRING ENGINES PLAY
VIDEO: DISCOVERY'S MAIDEN FLIGHT: ASSORTED VIEWS OF FRF PLAY

VIDEO: THE HISTORY OF SHUTTLE DISCOVERY PLAY
VIDEO: THE HISTORY OF SHUTTLE ENDEAVOUR PLAY
VIDEO: THE HISTORY OF SHUTTLE ATLANTIS PLAY

VIDEO: INSPECTION OF THE MISSION PAYLOADS PLAY | HI-DEF
VIDEO: ROBONAUT ARRIVES AT KENNEDY SPACE CENTER PLAY | HI-DEF
VIDEO: SPACE STATION'S SPARE THERMAL RADIATOR PLAY | HI-DEF
VIDEO: BLANKETING LEONARDO WITH INSULATION PLAY | HI-DEF
VIDEO: RACK INSERTED INTO LEONARDO FOR LAUNCH PLAY | HI-DEF
VIDEO: LEONARDO RETURNS FROM ITS PREVIOUS FLIGHT PLAY | HI-DEF
VIDEO: STATION'S SPARE PARTS DEPOT ARRIVES PLAY | HI-DEF

VIDEO: ORBITER'S PAYLOAD BAY CLOSED FOR ROLLOUT PLAY | HI-DEF
VIDEO: ASTRONAUTS VISIT THEIR SPACECRAFT PLAY | HI-DEF
VIDEO: CREW INSPECTS LEONARDO MODULE PLAY | HI-DEF
VIDEO: DISCOVERY RECEIVES ITS MAIN ENGINES PLAY | HI-DEF
VIDEO: FUEL TANK MATED TO SOLID ROCKET BOOSTERS PLAY | HI-DEF
VIDEO: HOISTING FUEL TANK INTO CHECKOUT BAY PLAY | HI-DEF
VIDEO: EXTERNAL FUEL TANK UNLOADED FROM BARGE PLAY | HI-DEF
VIDEO: MISSION'S FUEL TANK ARRIVES AT SPACEPORT PLAY | HI-DEF

VIDEO: POST-FLIGHT DESERVICING: OMS POD PLAY | HI-DEF
VIDEO: POST-FLIGHT DESERVICING: OBSS BOOM PLAY | HI-DEF
VIDEO: POST-FLIGHT DESERVICING: ENGINES PLAY | HI-DEF
SUBSCRIBE NOW